Tackle for the Real World 
Hello guest
Your basket is empty

Accessories 

19097 Line Winder with vacuum suction base 
Our new Line Winder features a vacuum base with a strong suction lever so it will grip firmly to any fl at surface. Suitable for loading ALL types of line or backing line onto fl y reels, multiplier reels or spinning reels.  
19091 Line Winder
The extra-long aluminium stem will hold all sizes of line spool including bulk spools, while the tapered aluminium cones hold spools securely and prevent ‘spool wobble’ whilst loading onto the reel. A double spring tension system allows adjustment to the line tension, as you wind lines onto reel. 
19449 Rig / Trace Wallet 
As you’d expect from Snowbee, our new Rig / Trace wallet is a bit different! 12 heavy duty, clear trace pouches in 2 sets of 6, held in place with a neat Velcro spine. 
Easily removable and extra sets can be added, or removed as required, so you can keep different rigs in each set and only take what you need. 
Colour: Royal Blue / Black 
Size: 10” x 7” 

Zingers & Snips 

19091 Prestige Zinger 
A top quality Zinger with a satin finish alloy case. Fitted with an 18” plastic covered wire cord and a stainless steel accessory clip. Attached with a sturdy safety pin. 
19093 Heavy-duty Wading Staff Zinger 
Manufactured to our own exclusive design, our heavy duty zinger can be used with large nets, such as Salmon Gye nets, as well as wading staffs. The 54” Kevlar cord can be locked at any position, so a wading staff or landing net is always attached to you, but at a convenient distance. 
19094 Prestige Double Zinger 
A double Zinger fitted with two 18” strong braided cords, with swivel ends and stainless steel accessory clips. Attached with a sturdy safety pin. 
19436 Stainless Snips 
A quality pair of stainless steel snips, equipped with an eye needle and a knot-tying tool, which will double as a simple disgorger. Ultra sharp blades will cut cleanly through any size leader material. The flat-ground cutting edge means these snips can be re-sharpened on a stone, when required. 

Filleting and Gutting Knives 

Equally, there is nothing worse than hacking away with a blunt, second rate knife – a quality knife simply makes all the difference and every fishing bag or kitchen should have one! 
Our range of knives offer superior performance coupled with great value for money. All the blades are forged in 420 grade stainless steel for flexibility, razor-sharp edge and long life. 
* (Please Note: Knives are a product requiring proof of age before purchase and are therefore not available 'On Line'. Please refer to the 'Find a Dealer' section on the 'Home Page' for your nearest retail stockist ) 
A quality glove made from a cut-resistant stainless steel core, wrapped with an interwoven polyester and vinyl material, provides a firm grip on any slippery fish or meat, to reduce accidental cut damage. Stain and moisture resistant, these gloves are dishwasher and washing machine safe. Can be worn on left or right hand. 
Sizes: S/M; L/XL 
19317 7” Prestige Filleting Knife 
7” one-piece forged s/s blade, bolster and tang for extra strength. Genuine Pakka wood handle and leather sheath. 
19317 7" Filleting Knife
* See Note Above 
19314 6” Gutting / Bait Knife 
6” stainless steel blade, rubber handle and nylon sheath. 
19314 6” Gutting / Bait Knife
* See Note Above 
19316 7" Filleting Knife 
7” stainless steel blade, Filleting/Boning Knife. Polypropylene handle for extra grip and polypropylene sheath, with spring belt-clip. 
19316 7" Filleting Knife
* See Note Above 
19315 6” Folding Filleting Knife 
6” stainless steel blade with rubber handle. Fold-out de-scaler and kidney blood removal tool. 
19315 6” Folding Filleting Knife
* See Note Above 
19313 Knife Sharpener 
Double action knife sharpener, with hardened alloy sharpening plates one end and ceramic the other. Rugged moulded construction, with finger ‘grips’. 
19102 Filleting Board 
A unique filleting board, with a strong spring-loaded clamp built-in. Will firmly grip the jaws or tail of the fish, to prevent it sliding away. Makes cleaning and filleting any fish a breeze. Wipe clean PE board, with ‘grip’ finish and non-slip pads underneath. 

Smoker Cooker 

Complete with stand, two fuel pans with heat adjustment, cooking pan, lid with adjustable smoke vent, drip tray and grill. Packs away neatly inside its own stand for convenient storage. Quick and efficient hot smoking of fish, meats, poultry etc., cooks AND smokes in one process, so smoked fish is ready in as little as 15 minutes. Uses methylated spirit fuel (not supplied). 
Size: 16½”x 10½”x 4½” 
19010-D Oak Dust for smoking 
Top quality, kiln dried English oak dust, which gives a wonderful rich flavour to all smoked foods. Now conveniently packed in resealable bags of 250g – sufficient for 4 or 5 full smokings. 
The smoke dust is finer and burns more slowly than our earlier ‘chippings’ giving even more flavour. 
Add our famous ‘Spike- Sole’ and you have the ultimate boot for any occasion where deep wading is not required. Our Spike Sole consists of hardened steel spikes, set between deep rubber ‘cleats’ so they are able to ‘flex’, which is what gives them their outstanding grip. We haven’t yet found a surface this sole will not grip on – even ice! 
 
Available in sizes: 6-11 
Colour: Grey trim and red lining 
 
Simply fasten the Wader-Grips to your boots, for instant, extra grip. The thermoplastic rubber material is highly elastic, so they will stretch to fit a wide range of boot sizes. 
Ideal for anyone who has to walk long distances to their fishing, so wants cleated soles, but also requires extra grip in the river or reservoir bank, or rocky shoreline. 
Sizes: L – for all waders or boots up to size 11. XL – for all wading boots, or larger waders from sizes 11-14 
Rubber sole & lower boot, with neoprene upper, with a thin neoprene gusset, to prevent sand ingress. Fastens with a non-corrosive, side zip, with a Velcro strap to prevent it coming undone. 
Weight: 1390g/49oz 
Colour: Navy/Grey 
Sizes: 7-13 
 
13164 Neoprene Flats Boots
13164 Neoprene Flats Boots Detail
13166 Neoprene “Flats” Wading/Kayaking Shoes 
To compliment our existing Flats Wading Boots, these shorter “shoes” offer a lighter alternative for the angler covering a lot of ground. They are also great for Kayaking or summer wet-wading & beachcombing . The upper is made from soft Neoprene and has a tough outer rubber sole, which partly “wraps” around the sides of the upper and has a fibre mid-sole for protection. 
 
Colour: Two-tone Slate Green & Black 
Sizes: 4 – 12 
(We recommend you choose 1 size up, on normal shoe size) 
 
19050 Boot Rack 
The simple solution to the problem of storing and drying waders or wellies; correct storage will also extend the life of your waders. Stores two pairs at a time. Rugged polypropylene construction. Screws to garage or tackle room wall with screws provided. 
19100 Boot Jack 
Waders or wellies are easily removed with this well made, practical boot jack. Rugged polypropylene construction with rubberised jaws for extra grip. Keep one in the car boot for easy wader removal on the bankside. 
19071 Boot Spray 
19070 Wader Fresh 
These unique products, exclusive to Snowbee, keep waders and boots fresh and free of odours and mould. They are derived from Chitosan, a totally natural, biodegradable product, extracted from the shells of shellfish. Chitosan has natural antimicrobial, antiseptic, deodorant and fungicidal properties. 
17540 Assist Hooks 
Having pretty much pioneered the craze of Japanese-style speed jigging in the UK over 10 years ago, we have gradually seen the method evolve, to the more relaxed style of ‘slow jigging’ so popular today. It was inevitable that we would launch our own range of Assist Hooks for this. Top quality, extra strong, super-sharp, forged jigging hooks, pre-rigged to 150lb braid. Available in the 3 most popular sizes for UK jigging. Always ensure you use a hook, with a gape larger than the width of the jig, to avoid ‘missed takes’. 
 
Packs of 3 hooks. 
Particularly suitable for droppers, as you don’t ‘shorten-up’ the dropper, every time you change a fly. Equally suitable in the larger size for quick change of plugs or lures when spinning.  
 
In packs of 3 
Use the clips as the ultimate wader gravel guard clip – far better than a lacing hook and guaranteed never to come undone. Also attach all manor of accessories to fly vest or wading jacket D-rings. Made from high strength spring alloy steel, with a hard, black outer finish electrically applied to ensure corrosion resistance. 
Pack of 2. Size: 1½” x 5/8” 
The single lined neoprene has a non-slip rubber finish on the underside to grip a boat’s rail. The outer surface is Velcro compatible, so the rod holder will grip on any size rail, up to 1.5”. A simple Velcro tab locks your valuable rod in position and there is a D-ring to attach a towel, or security lanyard. 
15170 Folding Aluminium Sea Angling Landing Net 
A new folding aluminium sea-angling net for the small, inshore boat fi sherman or shore angler. The folding mechanism is totally fool-proof, with nothing to go wrong! The large teardrop frame, has a 27” deep 1½” polyethylene mesh, while the handle has a foam grip. A simple ‘fl ick & twist’ action opens and deploys the net. 
 
Colour: Electric Blue. 
 
Specification: 
Frame Size: 23”x 19” 
Overall length: 55” 
Folded Length: 32” 
15170 Folding Aluminium Landing Net
Simple ‘flick & twist’ action opens and deploys the net 
Fitted with heavy duty polyethylene netting, this super-rugged net won’t let you down, when it matters. Frame size 23” x 26”. 
Overall length 75”. Frame slides down handle to a compact 48” for stowage. 

Wader Repair & Adhesives 

SST-EPZ Stormsure 5-minute Epoxy 
This easy to use syringe contains a 5-minute epoxy adhesive, ideal for Epoxy Buzzers, Lures and all Saltwater patterns with Epoxy heads. 25ml syringe. 
SST-BWR Stormsure Boot & Wader Repair Kit 
A convenient repair kit for all types of waders or boots. Kit contains 2 x 75mm Tuff-Patches, plus 1 x 5ml tube Stormsure adhesive, for all applications. 
SST-NRK Neoprene Repair Kit 
Neoprene Queen Repair Kit A simple repair kit for all Neoprene products. Kit contains 5 Neoprene repair discs in three different sizes, a tube of Black-Witch Neoprene repair glue and full instructions. 
SST-AG20 Stormsure Angler’s Glue 
This Cyanoacrylate-based superglue bonds in seconds and can be applied to a multitude of fishing applications, binding all types of materials, fly dressings, leaders, rod whippings etc. 20ml bottle. 
SST-A Stormsure Accelerator 
The original adhesive catalyst that allows Stormsure to cure in 1-2 hours. 
SST-PRK Stormsure Pocket Puncture Repair Kit 
A neat little pocket repair kit containing 12 mini Tuff-Patches of 25mm diam. Provides instant repairs for small cuts or punctures in waders or clothing, to get you back fishing… fast! 
SST Stormsure Adhesive 
The original adhesive and sealant for all types of repair in waders, boots and just about anything else you can think of. We even use to re-stick felt soles! Available in either 15g or 3 x 5g tubes, plus bulk trade-pack tubs. 
Model 
Description 
 
SST-15 
Stormsure Adhesive - 1 x 15g 
SST-3/5 
Stormsure Adhesive - 3 x 5g 
SST-75/5 
Stormsure Adhesive - 75 x 5g 
SST-35/15 
Stormsure Adhesive - 35 x 15g 
SST Stormsure Adhesive
Model 
Description 
 
SST-15 
Stormsure Adhesive - 1 x 15g 
SST-3/5 
Stormsure Adhesive - 3 x 5g 
SST-75/5 
Stormsure Adhesive - 75 x 5g 
SST-35/15 
Stormsure Adhesive - 35 x 15g 
SST-AG5 Stormsure Angler’s Glue Pen 
A fast-acting superglue, but in a convenient ‘pen’ for easy application on the river bank or the fly-tying bench. 5ml pen. 
SST-LD Stormsure Leak-Detector (for Breathable fabrics) 
Leak-Detector will find those annoying little pin-prick leaks in breathable fabric quickly. Simply pump-spray the Leak-Detector over the suspect area and any leaks will appear as small, dark patches in no time. Quickly repair with Suncure, Stormsure or our Pocket Repair Kit to get you back fishing fast! 
SST-TP2R Stormsure Tuff-Patch (Round) 
New from Stormsure – tough, self adhesive, clear PVC patches, providing quick & easy repair to waders, jackets, boots etc. Sticks to just about anything, even when wet! 2 x 75mm diameter patches. 
SST-TP2L Stormsure Tuff-Patch (Long) 
The same as the Round Tuff-Patch, but in long strips for longer tears or seam leaks. 2 x 150mm long patches. 
SST-ZO Stormsure Zip-Oil 
A silicone based oil which keeps all zips free-running and clear of corrosion. 
Reel Lubricants 
Any piece of precision engineering needs correct lubrication for maximum performance and to protect all bearing surfaces. This range of reel lubricants not only enhances your reel’s performance, but also prevents corrosion, to prolong your reel’s life. These ultra-high-tech lubricants, manufactured in Germany, are the latest generation, incorporating ‘molecular bonding’ technology, so they actually adhere to the metal surfaces, providing ‘persistent lubrication’ and an impermeable barrier to saltwater, to eliminate corrosion. 
A new generation of reel lubricants, to protect your valuable investment! 
The range includes 4 models: 
ReelX – a high tech reel oil for general purpose use on all reels, particularly bearings. SpeedX – an extreme pressure reel oil, with a wide operating temperature range, making it ideal for high speed reels, such as beachcasters and long distance fixed spool reels.  
ReelX Grease – Medium – an ideal grease for all heavy duty moving parts such as gears, levers, anti-reverse dogs, etc.  
ReelX Grease – Soft – similar properties to the ‘medium’ formula, but in a soft grease, making it ideal for lighter applications and also perfect for applying a light coating to the inside of a reel cage, for complete saltwater protection. 
 
Model 
Description 
Volume 
 
ReelX-RO 
ReelX Reel Oil 
30ml 
Reel-SO 
SpeedX Reel Oil 
30ml 
ReelX-GM 
ReelX Grease – Medium 
30ml 
ReelX-GS 
ReelX Grease – Soft 
30ml 
Reel Lubricants
Model 
Description 
Volume 
 
ReelX-RO 
ReelX Reel Oil 
30ml 
Reel-SO 
SpeedX Reel Oil 
30ml 
ReelX-GM 
ReelX Grease – Medium 
30ml 
ReelX-GS 
ReelX Grease – Soft 
30ml 

Fly & Line Dressings 

SST-F / S Stormsure Fly Floatant & Tippet Sinkant 
These novel products contain everything a dry-fly fisher could need. A silicone based fly floatant, to prevent hackles getting waterlogged and keep dries floating high and a Tippet Sinkant, which breaks the surface tension and allows leader tippets to cut quickly through the surface film. Available individually or as a twin-pack. 
SLSK Snowbee Line Slick 
A silicon based fly line lubricant, which reduces friction and resistance through the rings, allowing faster line speed at all times. Helps protect fly lines from damage and the effects of harmful chemicals. 
SFLD Snowbee Fly-Line Degreaser 
Our degreaser is the only known silicone solvent, which effectively removes all traces of silicone or grease from the fly line, allowing it to cut quickly through the surface.