Fishing Accessories

Smoker Cooker - Download Pdf Spec / Price

BACK TO TOP >

19011 Smoker Cooker

A generously sized Hot Smoker/Cooker constructed in Stainless Steel for easy cleaning and long life. Will take four or five small Trout, or two large fish, headed and tailed. Complete with stand, two fuel pans with heat adjustment, cooking pan, lid with adjustable smoke vent, drip tray and grill. Packs away neatly inside its own stand for convenient storage. Quick and efficient hot smoking of fish, meats, poultry etc., cooks and smokes in one process, so smoked fish is ready in as little as 15 minutes. Uses methylated spirit fuel (not supplied).

Size: 16½”x 10½”x 4½”

19010-D Oak Dust for Smoking

Top quality, kiln dried English Oak dust, which gives a wonderful rich flavour to all smoked foods. Now conveniently packed in resealable bags of 250g - sufficient for 4 or 5 full smokings. The smoke dust is finer and burns more slowly than our earlier ‘chippings’ giving even more flavour. Try this on the Barbecue to add a rich smokey flavour to all outdoor cooking.

BUY ONLINE >

Frequently Asked Questions on Smoking Fish

Filleting and Gutting Knives

Our new range of knives offer superior performance coupled with great value for money. All the blades are forged in 420 grade stainless steel for flexibility, razor-sharp edge and long life. (Please Note: Knives are a product requiring proof of age before purchase and are therefore not available 'On Line'. Please refer to the 'Find a Dealer' section on the 'Home Page' for your nearest retail stockist )

19316 7” Filleting Knife

7” stainless steel blade, Filleting/Boning Knife. Polypropylene handle for extra grip and polypropylene sheath, with spring belt-clip.

19315 6” Folding Filleting Knife

6” stainless steel blade with rubber handle. Fold-out de-scaler and kidney blood removal tool.

19314 6” Gutting / Bait Knife

6” stainless steel blade, rubber handle and nylon sheath.

19317 7” Prestige Filleting Knife

7” one-piece forged s/s blade, bolster and tang for extra strength. Genuine Pakka wood handle and leather sheath.

19313 Knife Sharpener

Double action knife sharpener, with hardened alloy sharpening

plates one end and ceramic the other. Rugged moulded construction, with finger ‘grips’.

19102 Filleting Board

A new, unique filleting board, with a strong spring-loaded clamp built-in. Will firmly grip the jaws or tail of the fish, to prevent it sliding away. Makes cleaning and filleting any fish a breeze. Wipe clean PE board, with ‘grip’ finish and non-slip pads underneath.

Accessories

Aluminium Water Bottles

Ultra light weight, unbreakable Aluminium water bottles. Leak-proof screw plugs with a split ring and aluminium karabiner to clip to a D-ring.

Colour: Matt Olive Green

Sizes: 500ml (½ litre) & 1,000ml (1 litre)

No-Knot Fas-Snaps

These ingeneous links allow quick and easy changes of fly or lure, without the constant need for tying knots. Simply tie one onto the tip or dropper and change flies very easily. Particularly suitable for droppers, as you don’t ‘shorten-up’ the dropper every time you change a fly. Equally suitable in the larger size for quick change of plugs or lures when spinning. Packs of 5.

Available in 3 sizes for all types of flies or lures:

Medium – for fly sizes 18 – 12 (Bronze finish)

Large – for fly sizes 12 – 8 (Bronze finish)

X-Large – for large saltwater flies plus all

sizes of lures or plugs (Nickel finish)

No-Knot Eyelets

Unique new leader connector for all braided core fly lines, which replaces looped connectors or needle knots. Virtually weightless and incredibly strong.

A simple needle design with 2 sliced ‘barbs’ on the shank and an eyelet on the end. Simply push the pin into the end of a fly line and ‘tap home’ with a small hammer or any metal object. Once correctly in place, the barbs offer incredible grip, which is stronger than the tippet. On light dry-fly lines they improve presentation substantially whilst on heavier distance lines, you don’t get the tip cracking problems associated with the ‘hinge-point’ on braided loops. Packs of 3.

19050 Boot Rack

The simple solution to the problem of storing and drying waders or wellies; correct storage will also extend the life of your waders. Stores two pairs at a time. Rugged Polypropylene construction. Screws to garage or tackle room wall with screws provided.

19100 Boot Jack

Waders or Wellies are easily removed with this well made, practical Boot Jack. Rugged Polypropylene construction with rubberised jaws for extra grip. Keep one in the car boot for easy wader removal on the bankside.

NRK Neoprene Repair Kit

Like any wader material, Neoprene is prone to puncture damage and can also develop seam leaks. Any leak is easily repaired using our new Neoprene Repair Kit. Includes five Neoprene repair disks in three different sizes, a tube of Black- Witch Neoprene repair glue and full instructions.

19040 Felt-Sole Kit

Complete Kits to replace soles on Felt-Sole Waders. Includes adhesive, replacement felt-soles and full instructions.

Sizes 5 to 13.

19047 Wading Boot Felt-Sole Kit

Specifically designed for replacing Felt-Soles on Wading Boots. The one-piece Felt sole is oversize to fit any size boot up to Size 14 and is simply cut down to fit smaller sizes. Includes adhesive, replacement felt-soles and full instructions.

One size fits all.

19061 S-Hook Double Carabiner Clip

Our new S-Hooks are one of those indispensable accessories that you’ll wonder how you ever did without! The double carabiner principle, allows just about anything to be attached to anything! Use the clips as the ultimate wader gravel guard clip – far better than a lacing hook and guaranteed never to come undone. Use the clips to attach all manor of accessories to fly vest or wading jacket D-rings. Made from high strength spring alloy steel, with a hard, black outer finish electrically applied to ensure corrosion resistance.

Boot Laces

Model No. 13073-L: (Green/Tan) - 56”

Model No. 13076-L: (Black/Grey) – 68”

Tough replacement laces for our Wading Boots and being long laces, suitable for Hiking Boots too.

19060 Screw-In Wader Studs

Super hard, zinc plated steel studs, give additional grip to felt, or cleated sole waders. Hexagonal heads give additional grip in slippery conditions and can be easily screwed in with a socket, or a Phillips screwdriver.

Bag of 40.

19077 Line Winder

A simple aluminium line winder with a suction cup base, which will attach firmly to any smooth, flat surface. The long main shaft allows even bulk spools of monofilament to be spooled and the spring loaded retainer allows line tension adjustment. Simple, easy, single handed spooling of any type of line or backing, without the need for pencils, toes or door-handles!

19091 Snowbee Prestige Zinger

A top quality Zinger with a satin finish alloy case. Fitted with an 18” plastic covered wire cord and a Stainless Steel accessory clip. Attached with a sturdy safety pin.

19094 NEW Prestige Double Zinger

A new double Zinger fitted with two 18” strong braided cords, with swivel ends and stainless steel accessory clips. Attached with a sturdy safety pin.

19436 Stainless Snips

A quality pair of Stainless Steel Snips, equipped with an eye needle and a knot-tying tool, which will double as a simple disgorger. Ultra Sharp blades will cut cleanly through any size leader material. The flat-ground cutting edge means these Snips can be re-sharpened on a stone, when required.

19103 Fly Line Cleaner/Leader Straightener

A really useful accessory. Two surfaces have felt pads for fly line cleaning/dressing and the other 2 have rubber pads to straighten leaders. Plastic D-ring to attach to vest or zinger.

SLSK Snowbee Line Slick

A silicon based fly line lubricant, which reduces friction and resistance through the rings, allowing faster line speed at all times. Helps protect fly lines from damage and the effects of harmful chemicals.

SFLD Snowbee Fly Line Degreaser

Our degreser is the only known silicone solvent, which removes all traces of silicone or grease from the fly line, allowing it to cut quickly through the surface.

WB Wonder Bar

This amazing “Metal Soap” removes any strong odours from the hands – fish, onions, garlic etc. just by rubbing under running water. The metal alloy reacts with the acids, which cause the odour and remove them. Floats if dropped and comes with a lifetime guarantee.

Wader Fresh & Boots Spray

These unique products, exclusive to Snowbee, keep Waders & Boots Fresh & free of Odours & mould. These two hi-tech sprays are derived from Chitosan. A totally natural, biodegradable product, extracted from the shells of Shellfish. Chitosan has natural antimicrobial, antiseptic, deodorant and fungicidal properties. The convenient 70ml hand-pump is easy to apply to Waders, Boots, or any type of Footwear, to keep them fresh and reduce foot odour. The totally natural properties of Chitosan inhibit the growth of bacteria responsible for unpleasant musty odours.

SZO Zip Oil

Zip Lubricating oil, ideal for wader and dry suit zips, jackets foul weather gear etc. Non Toxic, stays liquid at low temperature. Press on dropper cap

SSC Snowbee Suncure Wader Repair

This revolutionary material is EXCLUSIVE to Snowbee and transforms Wader Repair! A totally flexible, clear repair material, with similar properties to other products on the market…. except Suncure is cured by UV LIGHT! Suncure is totally cured in anything from 15 seconds in high UV conditions to 5 minutes in low UV conditions. With Snowbee Suncure, a lost days fishing due to damaged or leaking waders is a thing of the past ! Simply apply Suncure to the damaged area, wait a maximum of 5 minutes and carry on fishing. On Neoprene waders you don’t even have to dry the area to be repaired! Suitable for all types of Waders and equally effective on Boots, Waterproofs, Float-tubes, Bags, Tents etc.

NRK Neoprene Repair Kit

Like any wader material, Neoprene is prone to puncture damage & can also develop seam leaks. Any leak is easily repaired using our new Neoprene Repair Kit. Includes 9 neoprene repair disks in 3 different sizes, neoprene tape, a tube of Neoprene repair glue and full instructions.

SST Wader Repair Glue

Made and packaged for us by Stormsure, the renowned glue specialists, leaks and tears in all types of waders can be easily and permanently repaired. Available in two sizes, 15g and the smaller, convenient 5g (in a twin pack) especially for travelling and for emergencies.

SAG Angler’s Glue

This Cyanoacrylate based glue, bonds in seconds and can be applied to a multitude of fishing applications, binding all types of materials, fly dressings, leaders, Rod whippings etc.

SLD Leak Doctor

We’ve all had them…those annoying little pin prick leaks in our breathable waders, caused by thistles, brambles & gorse along the bank. Leak Doctor will find them. Simply pump-spray the Leak Doctor over suspected area and any leaks will appear as small, dark patches in no time. Quickly repaired with Suncure or Wader Repair Glue.

TOSI Turn-On Strike Indicators

Undoubtedly the best and most reliable strike indicator on the market. The big advantage over other strike indicators is that they do not have to be threaded onto the leader. Simply slide the leader into the side slit and rotate half the indicator around the leader. This puts one turn of the central rubber band around the leader and prevents it sliding OR coming off during casting. However, you can still move the Turn-On up and down the leader to alter the fishing depth, as required. The only strike indicator on the market which will do this. Add one or two further turns and the indicator is locked in position, even on the finest leader. Turn-On….reusable, reliable & convenient. Available in packs of 4, in 3 sizes: Large: 18 x 9mm Medium: 16 x 8mm Small: 16 x 6mm

AL-STP ‘Stripee’ Stripping finger protectors

Without doubt the best Stripping finger protectors we have come across. A simple, innovative design offering good protection to both the wearer and the fly line. Lycra Finger “tubes” with felt protector pads, which can be treated with line lubricant to clean line as you strip! Prevents cuts & abrasion from the fastest running saltwater species, or even on the local reservoir. Colour: Sand/White Sizes: M, L & XL

19020 Rod Holder

The famous and original Snowbee Rod Holder is back, after a break of almost 10 years! Rugged nylon construction, with an adjustable swivel mount & rod locking collar.

19030 Rail mount adaptor

The rail adapter allows the Rod Holder to be clamped to a ¾” to 1” rail, if required.

19075 “Fish-Bone” Bottle Openers

Novel anodised aluminium bottle openers in a funky “fish-bone” style. Black or Blue with a laser etched logo and a key-ring attachment. Never be without one!

New Aluminium Priests

Our aluminium priests bring a touch of class to what is a fairly mundane process. The glass-fibre shafts are varnished in the same colours as our Prestige and Diamond fly rods and over-whipped

in fine gold thread. The solid aluminium heads are chrome plated and have enough weight to quickly and efficiently despatch your catch. Ethafoam handle grips provide a comfortable grip, with the Snowbee logo etched into the foam. Elasticated wrist lanyards prevent loss.

Packaged in a neat carry bag, with a belt loop, so it can be worn on the belt ready for action.

Diamond Priest – Trout size – length 8” (20cms) Wt. 5.2oz (146g)

Prestige Priest – Salmon size – length 10” (25cms) Wt. 7.8oz (218g)

19076 Prestige Priest

A quality priest with a good, heavy, solid brass head, metal shaft & real wooden handle. Fitted with a wrist lanyard for security.

19079 Magnetic Net Release

This new Magnetic Net Release is considerably stronger than previous models, despite being smaller. It is attached via the two split rings supplied, allowing simple connection to the D-Ring on the back of any wading jacket or fly vest. The elasticated bungee lanyard is looped at both ends for easy attachment, to ensure the net remains connected to you. Also supplied is a small elasticated strop, so that the net can be hung by the frame or handle as required, to suit ones preference and particular fishing environment.